Razor blade of mill of solder of drill rod of IB85 PCBN of ＆ of Yi Sika ID5 PCD

  • Time:
  • Click:160
  • source:NODIE CNC Machining
ISCAR is supplementary razor blade of razor blade of mill of butterfly of Xiu Guangren of ID5 PCD TANGMILL of solder of new-style drill rod and mill of blade of helix of IB85 PCBN HELIMILL of solder of 2 kinds of drill rod, in order to be used at treatment cast-iron and material of efficient cutting difficult treatment. Razor blade of mill of butterfly of new-style LNAR 1106PN-R-S-W ID5 PCD, r of big circular arc of point of a knife is designed, sharp cutting blade. Razor blade of distinctive the blade that repair light can be obtained bright and clean even had spent at Ra0.

The exterior quality of M of 3 μ . New razor blade can be placed directly hold adjust at standard face milling cutter or new axial model face milling cutter, recommend clip strongly to hold 1-2 piece the razor blade that repair light. The solder of drill rod of razor blade of HELIMILL series ADKW 1505 PDER IB85 of ISCAR the point of a knife of IB85 PCBN, can use at milling cutter of 90 ° face to reach finish machining in order to be used at cast-iron semifinishing machining. R0 of radius of round horn of point of a knife.

8 Mm, grind make cutting blade (0.

03 Mm) . Can place hold the F90AD at the standard.

.

.

- SFR or E90AD.

.

.

- HSK63-S axial is adjustable model milling cutter. Pass axial adjustment razor blade, can achieve the appearance bright and clean degree amount to 0.

3-0.

M of 7 μ . IB85 is to exceed the cubic nitrogen of fine grained to change boracic name. The matrix of fine grained was ensured already grind the cutting blade that makes a special acuteness in order to acquire high exterior quality, give attention to two or morethings tall cutting tool life. IB85 brand can apply extensively at processing difficult treatment data, hold <> concurrently provided efficient reach tall cutting tool life. IB85 contains 85% PCBN and Al Co, w binder. Exceed coriaceous material to pledge applicable is reached at heavy-duty rough machining intermittent treatment. The material limits that IB85 can machine includes hardness to be more than the hard steel of temper by dipping in water of HRC45 and cast steel, casting pig reachs nodular cast iron, pulverous metallurgy material reachs heat-resisting alloy. CNC Milling